86 17344894490

2024 Aluminum Block

2024 Solid Square Rectangle Aluminium Block
2024 Aluminum Block for Billet, Mold, Vehicle Wheel, 
Propeller structure,Aircraft Frame, Trailer Wheel
2024 Solid Square Rectangle Aluminium Block is a typical hard aluminum alloy in Al Cu mg system. Its composition is reasonable and its comprehensive performance is good. 2024 Solid Square Rectangle Aluminium Block has the advantages of high strength and heat resistance, and can be used as a working part below 150 deg C. The temperature is higher than 125 C, and the strength of the alloy is higher than that of 7075 aluminum alloy. Under the condition of hot state, annealing and new quenching, the forming performance is good, and the heat treatment process is strict,so the heat treatment effect is obvious.


Alloy Temper Thickness(mm) Width(mm) Length(mm) Surface Treatment: Shape:
2024 Solid Square Rectangle Aluminium Block O、T3、T4、T6、T72、T81、T361、T351、T861、T3511、T8611
6-300 100-2600 500-16000 Mill Finish
Anodized Finish.
Remark:can made available in different dimensions as per the requirement of the clients.
Alloy Chemical Component
Si Fe Cu Mn Mg Cr Zn Ni Ti others Al
single total
2024 0.50 0.50 3.8-4.9 0.30-0.9 1.2-
0.10 0.25   -- 0.15 0.05 0.15 Remainder

Performance advantage

1, 2024 Solid Square Rectangle Aluminium Block has no oil, no aluminum surface waves, no scratches, no roller, uniform cutting edges and burr;
2, 2024 Solid Square Rectangle Aluminium Block has low density, high specific modulus, good thermal conductivity and electrical conductivity, good manufacturing process;
3, Signi aluminum production with ultra wide, super thick aluminum production line, the production of the test of the Solid Square Rectangle Aluminium Block, has good mechanical properties, strength in the processing of the stool, the density is small, can be used as light structural materials
4. The tensile strength of the 2024 Solid Square Rectangle Aluminium Block is 400-500MPa, and the heat resistance and fatigue resistance of the alloy are better than that of the alloy.    

2024 Solid Square Rectangle Aluminium Block can be used for Propeller structure,aircraft frame, TRAILER WHEEL,etc.