- 5005 Aluminum Block
- 5052 Aluminum Block
- 5083 Aluminum Block
- 5086 Aluminum Block
- 5182 Aluminum Block
- 5454 Aluminum Block
- 5754 Aluminum Block
- 6061 Aluminum Block
- 6063 Aluminum Block
- 6082 Aluminum Block
- 1060 Aluminum Block
- 2024 Aluminum Block
- 2A12 Aluminum Block
- 7005 Aluminum Block
- 7075 Aluminum Block
- 3003 Aluminum Block
NEWS
INFORMATIONTel:
86 173448944905005 Aluminum Block
Location ：HOME/5005 Aluminum Block
5005 Solid Square Rectangle Aluminum Block
5005 Block of Aluminum Block for Milling,Dashboard, Shell and Architectural Trim
5005 aluminum magnesium alloy Solid Square Rectangle Aluminium Block with the equivalent strength of 3003, with good workability, medium strength and good corrosion resistance. But the anodic oxide film is brighter than the 3003 alloy, and is consistent with the tone of the 6063 alloy.
| Alloy | Temper | Thickness（mm） | Width（mm） | Length（mm） | Surface Treatment: | Shape: |
|
5005 Solid Square Rectangle Aluminium Block |
O,H12,H14, H16,H18,H19, H22,H24,H26, H28,H32,H34 H36,H38,H111, H112,H114,H 116,H321 |
6-300 | 100-2600 | 500-16000 |
Mill Finish Anodized Finish. |
Square Rectangular |
| Remark:can made available in different dimensions as per the requirement of the clients. | ||||||
| Alloy | Chemical Component (%) | |||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ni | Ti | others | Al | ||
| single | total | |||||||||||
| 5005 | 0.30 | 0.7 | 0.20 | 0.20 | 0.50- 1.1 | 0.10 | 0.25 | -- | -- | 0.05 | 0.15 | Remainder |
Performance advantage
1,5005 alloy Solid Square Rectangle Aluminium Block has low density, high tensile strength, high elongation, good welding performance.
2, 5005 alloy Solid Square Rectangle Aluminium Block ,use continuous casting and rolling process, has a good processing performance, with corrosion resistance, weldability, and with deep oxidation processing performance
Application:
5005 Solid Square Rectangle Aluminium Block can be used as dashboard, shell and architectural trim,etc.
