Email ：

sales@signialuminium.com
PRODUCTS
PRODUCT CENTER
SERVICE PHONE
86 17344894490

Application

Location ： Home/Application/ Aluminium Block Parts

Aluminium Block Parts

Last Updated ：2023/06/13

Aluminium block for different parts 

   Signialuminium specilizes in procesing Aluminium block for different parts , we have the slitter line, slab cutting line, shear line. The equipments include sheet shear machine, plate sawing and cutting machine, tube and bar sawing machine and so on. We can slit, cut across, longitudinal cutting, sawing, shearing and coated with plastic. We can offer the exactest Aluminium block for different parts which is the most economical and reasonable.

 

   Aluminium block for different parts , offered by us, are manufactured using high quality Aluminum,are made available in different dimensions as per the requirement of the clients. Owing to their good formability, high corrosion resistance, good weldability,good physical properties, processability ,and with high strength, high hardness ,low sensitivity to crack,etc,the Aluminium block can be used for different parts.
 
General Specification
Alloy Temper Specification (mm)
Thickness Width Length
3003,5052 5182,
6061,6063,6082
 		 H111, H112, H116,T4, T6, T651 6~300mm 100~2600 500~16000
Remark: special specifications can be produced accordingly to your requirement.
 
Main Aluminum Alloy Chemical Composition
Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Others Alu min
each Total
3003 0.6 0.7 0.05-0.20 1.0-1.5 - - - 0.10 - 0.05 0.15 remainder
5052 0.25 0.40 0.10 0.10 2.2~2.8 0.15~0.35 - 0.1 - 0.05 0.15 remainder
5182 0.20 0.35 0.15 0.20-0.50 4.0-5.0 0.10 - 0.25 0.10 0.05 0.15 remainder
6061 0.4~0.8 0.7 0.15~0.40 0.15 0.8~1.2 0.04~0.35 - 0.25 0.15 0.05 0.15 remainder
6082 0.7-1.3 0.50 0.10 0.40-1.0 0.6-1.2 0.25 - 0.20 0.10 0.05 0.15 remainder
6063 0.20-0.6 0.35 0.10 0.10 0.45-0.9 0.10 - 0.10 0.10 0.05 0.15 remainder
 
Main Aluminum Alloy Physical property
Alloy Temper Specified
Thickness
mm		 Tensile
strength
Rm MPa		 Yield strength
Rp 0.2 MPa		 Elongation
min.		 Bend
Radius		 Hardness
over Up to Min. Max. Min. Max. A50mm A 180° 90° HBW
3003 O/H111 6.0 12.5 95 135 35   24     1.5t 28
12.5 50.0 95 135 35     23     28
H112 ≥ 6,0 12,5 115 - 70   10       35
12,5 80,0 100 - 40     18     29
5052 O/H111 6 12.5 165 215 65 - 19 - - 2.0t 46
12.5 80.0 165 215 65 - - 18 - - 46
H112 6 12.5 190 - 80 - 7 - - - 55
12.5 40.0 170 - 70 - - 10 - - 47
40.0 80.0 170 - 70 - - 14 - - 47
5182 0/H111 0,5 1.5 255 315 110 - 12 - 1.0t - 69
1.5 3.0 255 315 110 - 13 - 1.0t - 69
6061 O 6,0 12,5   150   85 16     2,0 t 40
12,5  25,0   150       16     40
T4/T451 6,0 12,5 205   110   18     4,0 tb 58
12,5 40,0 205   110     15     58
40,0 80,0 205   110     14     58
T42 6,0 12,5 205   95   18     4,0 tb 57
12,5 40,0 205   95     15     57
40,0 80,0 205   95     14     57
T6
T651
T62		 6,0 12,5 290   240   9     5,0 tb 88
12,5 40,0 290   240     8     88
40,0 80,0 290   240     6     88
80,0 100,0 290   240     5     88
100,0 150,0 275   240     5     84
150,0 250,0 265   230     4     81
250,0 350,0 260   220     4     80
6082 O 6,0 12,5   150   85 17     2,5 t 40
12,5 25,0   155       16     40
T4/T451 6,0 12,5 205   110   14     4,0 t b 58
12,5  40,0 205   110     13     58
40,0 80,0 205   110     12     58
T42 6,0 12,5 205   95   14     4,0 t b 57
12,5 40,0 205   95     13     57
40,0 80,0 205   95     12     57
T6
T651
T62		 6,0 12,5 300   255   9     6,0 t b 91
12,5 60,0 295   240     8     89
60,0 100,0 295   240     7     89
100,0 150,0 275   240     6     84
150,0 175,0 275   230     4     83
175,0 350,0 260   220     2      



Applications：
The Aluminium block can be used for different parts.


LINK ：
Address：Zhengzhou City, Henan Province, China  Tel:86 17344894490 
Email： sales@signialuminium.com  CopyRight @ Signi Aluminium.
Site Map (xml)